Parker-Skinner

This will allow you to adjust the rate at which your valves release air. You can use this if your system drops too fast or raises too fast. This has a 3/8" NPT fitting. If hooking this up to a 3/8" valve you will need a 3/8" NPT to 3/8" NPT fitting (not included). You will need 1 for each dump valve.

Max Working Pressure: 150PSI
Max Burst Pressure: 300PSI
Port Size: 1/2"
Orifice Size: 5/8"
CV Factor: 4.0
Voltage: 12 Volts
Amperage: .5 Amps
4-Valves Required For Front And Back Setup
8-Valves Required For Front, Back, Side, Side Setup

Max Working Pressure: 150PSI
Max Burst Pressure: 300PSI
Port Size: 3/8"
Orifice Size: 7/16"
CV Factor: 3.0
Voltage: 12 Volts
Amperage: .5 Amps
4-Valves Required For Front And Back Setup
8-Valves Required For Front, Back, Side, Side Setup